Monday, 20 October 2014

Home, Office & Industrial Automation & Control Systems ( 2 Channel Gateway- Detailed Analysis)



Product installation

It is expected that a trained installer should be the one to commission or decommission these systems. These steps should be followed while installing the video gateway systems.

1.     Placing the Video Gateway Unit

The Video gateway is the brain box of your video surveillance and Control/Automation system. If this system is tampered with, sabotaged, exposed to harsh conditions or manhandled, it will probably not give you maximum efficiency, and thus the aim of Home and office control/automation will be defeated. When choosing a location for the gateway, bear in mind that the unit must be connected to a power source and a LAN or a PC, and that other devices (camera, sensor, etc.) must be connected to it. Choose a location in which these necessary connections are feasible. The unit should be placed on a flat surface such as a table or shelf. (It is not designed for mounting directly on a wall.). Before installation begins ensure that the desired location where the gateway will be placed won’t be affected by moisture and it is properly ventilated.The unit should have at least a few centimeters of space above it and on all sides for ventilation. A secondary ventilation system can be built for the gateway to avoid overheating thus giving you maximum efficiency from the system.Though the gateway is built to last and very rugged, it’s always a plus to manage it carefully for 
longer performance.

Sample CCTV Positioning Diagram
  

2.     Supplying Power to the Video Gateway.

The unit can supply a maximum of 250 mA (3W at 12V) of power through the 12VDC Power Out connector. It can supply power to the cameras and other devices e.g.: activators, sensors, IAs, Relays etc. Note it is not very advisable to overload this power output because that can lead to overheating and subsequent damage of the system. For example, if a camera uses 150 mA and a sensor uses 50 mA, the total power usage of the two devices is 200 mA. Since the gateway can supply a maximum of 250 mA, this means that 50 mA will be available for other devices when these two devices are connected to the 12VDC Power Output connector on the video gateway system. So it is advisable to provide independent power supplies for some other equipment you will like to integrate into your surveillance system.
NOTE: It is, of course, possible to connect some devices to the 12VDC Power Out connector on the gateway, why? The voltage will remain constant since the external devices will be connected in parallel to it. But the current supply varies, so the current input of the external devices connected the gateway shouldn’t exceed the 250 mA output of the gateway.

3.     Install the CCTV cameras in desired locations for maximum coverage.

This is the essence of proper CCTV surveillance because whatever your camera sees is what you will see on your monitor. Many industries and Homeowners install CCTV systems to help curb or prevent cases of burglary thus protecting asset and personnel.
There are basic steps to follow when looking for the best locations to install your cameras. It is essential to follow some of these steps when looking for a location to install these CCTV cameras for efficient video coverage. These steps will be covered in the next post.

 Feel free to ask questions & don’t forget to view older Posts for more information.

No comments:

Post a Comment

begin clicksor end of clicksor